Sports clothes customization neutral lapel version how to play?
What kind of stand collar are there?
What kind of type led effect the performance?
How to play board?
A: stand collar is roughly divided into two kinds, shirt and coat of class.
Shirt neck circumference of a class Settings will not be huge, so in 0 case become warped in the midline in the area of the former.
The size of the shirt collar circumference refers to the size of the collar line, the collar circumference should be greater than specifications neck line 1.
5 a 1.
After the lapel case become warped in the quantity of 1.
The collar of the coat round set too large, so the collar in the former case become warped quantity can reach 3 -
4 cm or more, it has to do with the increase of neck line.
And according to the width of lapels are different.
After the lapel in case become warped quantity also can be set up in 5 -
7 cm, can also be used to fold lapel way to configure the collar structure on garment pattern after the collar stand and the collar surface, can also be used Angle method to separate collar and lapel.
But plate with this method and, collar band = a, must be the size of the lead foot 3 centimeters, collar face = b, after the points sew brought wide size 6 cm.
It can be divided into three steps.
The first step, according to the original fold lapel as 0.
7 a collar, which, with the former/collar point take 2 cm high collar before even the double broken line;
Before making style figure.
By the basis points to shoulder sew 6 + 0.
5 = 6.
5 cm for the lateral neck width and front neck width by the former in the high collar to make 7 pieces.
3 cm, then double broken line as the median line, use the method of equal generals folding turn to the outside of the garment body.
After get the same as the original fold the lapel of: 0.
9 a flat line.
Lapel Angle on flat line d: X / 2 (
In the piece on the neckline of access)
Then make lapel Angle must be greater than originally, because the actual collar band is 4 cm long;
Led to 5 cm.
The second step.
D) on the flat line: 0.
8 x / 2 = Z, must take the size in the opposite direction.
Said general closure converted double line loose rotation;
Collar bottom line take led the bottom line is the same with the original length & quot;
0, vertically in the bottom line of 3 cm for the high collar, the collar of connection points lead foot modelling, in the front collar bottom line must be extracted with the front neck line gap at 0.
The third step, after points lead foot brought the arc length & quot;
The bottom line to 0, and vertical maxillary flowing lines, as the new SNPS point, with the first step to do after folded double line in the attachment, or take the d's and the vertical line to long low Z by 0.
5 cm (
This is turn on lapel collar bottom line Angle)
And then take & quot;
Brought arc length, and also in the same way that a vertical line, measuring 6 cm wide lapels in after the line shape and lapel collars check port of seams made line model.
Finally, bring up and checked it, copy down collar JiaoPian and lapel.
From Zhang Xiaochong the 'sportswear to play board 150 cases of troubleshooting' sports is a custom-made clothes suit company, no matter from the selection of raw materials, or from the sport version, is the pursuit of perfection, 19 years of focus, make unceasing progress.
Sportswear design is the design of have to last long, occupy the important position in the sport history, is also a time for our movement's preferred style, as a result of what use is a light fabric, breathable sweat, therefore, was most welcomed.
We buy one or two pieces of clothes suit, basic to the stores in the street or on taobao to buy, because there are so many styles for us to choose!
But if we want to buy large quantities of clothes or a coupon, it is recommended that you let's take a look at.
Relevant recommendations: summer sport sportswear shirts order which is good